Display
1 line 4 digits .
LED
Temperature Coefficient
0
(For Rated value range of use 0... 50 C )
For Displaying Units and Parameter
Annunciator LEDs
2 Keys
Controls
User Interface
0
0.025% / C
Voltage
0
0.05% / C
Current
Digit height
14mm
Applicable Standards
IEC 61326-1:2005
IEC 61010-1: 2001,Permantly Connected use
EMC
Safety
IEC 60529
IP for water & dust
Safety
2
III
Pollution Degree
Installation Category
High Voltage Test
2.2 kV AC, 50 Hz for 1 minute
10V/m min-Level 3 industrial low level
Electromagnetic radiation environment
Current Range
10...100% of Nominal Value
20...100% of Nominal Value
Voltage Range
Accuracy
Current (3A / A)
+ 0.5% of Nominal value.
Voltage (3V / V)
+ 0.5% of Nominal value.
Reference conditions for Accuracy :
Measurement error is normally much less than errors specified in the above. Variation due
to influence quantity is less than twice the error allowed for reference condition.
19
To Next Page
Loading...
