Enclosure
IP50
Front
IP65
Front with seal(option)
IP20
Back
Polycarbonate Housing ,
Material
Screw-type terminals
Terminals
The Information contained in these installation instructions is for use only by installers trained
It is the user's responsibility to determine the suitability of the installation method in the
user's field conditions. Manufacturer only obligations are those in Manufacturer standard
Conditions of Sale for this product and in no case will Manufacturer be liable for any other
to make electrical power installations and is intended to describe the correct method of
installation for this product. However, Manufacturer has no control over the field condition
which influence product installation.
Incidental, indirect or consequential damages arising from the use or misuse of the products.
Environmental conditions
0
0 to 50 C
0
-25 to 70 C
0 .. 90 % (Non condensing)
Minimum 3 minute
15g in 3 planes
10 .. 55 Hz, 0.15mm amplitude
Operating temperature
Storage temperature
Relative humidity
Warm up time
Shock
Vibration
Dimension and weight:
Bezel Size (DIN 43718)
40mm
Overall Depth
310g Approx.
Weight
96mm X 96mm (DIN 43718 )
Panel Cut-Out
92 + 0.8mm X 92 + 0.8mm
48x96
models
68mm
250g Approx.
48mm X 96mm
43.5 + 0.6mm X 92 + 0.8mm
96x96
models
20
To Previous Page
Loading...
