EasyManua.ls Logo

Riso CZ100 - User Manual

Riso CZ100
92 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
Riso shall not be responsible for any damage or expense that might result from the use of
this manual.
Riso shall not be liable for any direct, incidental, or consequential damages of any nature,
or losses or expenses resulting from the use of this product or included manuals.
Riso shall not be responsible for any damage or expense that might result from the use of
information contained in this manual.
BCaution:
• Make sure to read the important operational safety information.
• Store this manual close-by, and fully acquaint yourself with the printing machine.
is a registered trademark of RISO KAGAKU CORPORATION in Japan and other
countries.
is a trademark of RISO KAGAKU CORPORATION.
is a trademark of RISO KAGAKU CORPORATION.
• As we are constantly improving our products, the machine may differ in some respects
from the illustrations used in this manual.
• The information contained in this document is subject to change without notice.
Copyright © 2008 RISO KAGAKU CORPORATION
CZ180_UG.book Page 1 Wednesday, October 31, 2007 6:19 PM

Table of Contents

Questions and Answers

  • W
    William MartinezSep 23, 2025
    What to do if attempt is being made to print a smaller number of pages than the minimum print quantity on Riso CZ100?
    • A
      aaronbrewerSep 23, 2025
      To solve this issue on your Riso Printer, select a larger number of pages than the minimum print quantity.
  • K
    Kristen OrozcoAug 25, 2025
    What to do if a paper jam has occurred on the paper receiving tray section of Riso CZ100?
    • C
      christine80Aug 25, 2025
      To resolve a paper jam on the Paper Receiving Tray section of your Riso Printer, remove the jammed paper. If you've changed the horizontal paper position, adjust the position of the Receiving Tray Paper Guides as well. If the error indications persist, press the key.
  • W
    wilsonpeterAug 25, 2025
    How to remove an original jam in the ADF unit of Riso CZ100?
    • D
      Dominique KingAug 26, 2025
      If an original jam has occurred in the ADF Unit of your Riso Printer, remove the jammed original. Grasp the Original Release Lever and open the ADF Cover to remove the jammed original.
  • S
    Scott RobertsAug 27, 2025
    What to do if a master jam has occurred in the master disposal section of Riso Printer?
    • C
      Crystal HallAug 27, 2025
      To address a master jam in the master disposal section of your Riso Printer, remove the Master Disposal Box and take out the jammed master. If you still cannot remove the jammed master, open the Master Disposal Unit and remove the master.
  • A
    abowmanAug 27, 2025
    How to correctly wrap a master around the print drum cylinder of Riso Printer?
    • C
      Christine CurtisAug 27, 2025
      If a master has not been correctly wrapped around the Print Drum (Cylinder) of your Riso Printer, pull out the Print Drum (Cylinder). If no master is wrapped around the Print Drum (Cylinder), proceed to Step 6. If wrapped, proceed to Step 2. Press the Print Drum (Cylinder) Release Lever and turn the Drum (Cylinder) until the clamp plate comes to the top. Press the Clamp Plate Release Lever to unlock the clamp plate and separate the Master from the Print Drum (Cylinder). Rotate the Print Drum until it is locked by the Print Drum Release Lever. Set the Print Drum into the machine. Open the Master Making Unit Cover and set the master again. Close the Master Making Unit Cover. Perform the master-making operation again.
  • J
    John BenitezSep 15, 2025
    What to do if the job separator has run out of tape in Riso CZ100?
    • M
      Melissa ChangSep 15, 2025
      If the Job Separator (option) has run out of tape for your Riso Printer, set new tape to the Job Separator.
  • A
    Anthony ChandlerSep 12, 2025
    Why an inappropriate master roll has been set in Riso Printer?
    • P
      Patricia RodriguezSep 13, 2025
      If an inappropriate master roll has been set in your Riso Printer, set a master roll specific to the machine.
  • J
    John SullivanSep 14, 2025
    What to do if power to the job separator is off in Riso CZ100?
    • M
      Michael AlexanderSep 14, 2025
      If power to the Job Separator (option) is off for your Riso Printer, turn on the power to the Job Separator.
  • M
    Martin SilvaSep 5, 2025
    What to do if master ejection has failed in Riso Printer?
    • Z
      zcherrySep 5, 2025
      If master ejection has failed in your Riso Printer, pull out the Print Drum (Cylinder) and remove the master from the drum by hand. Then, set the Print Drum (Cylinder) again and press the key.
  • B
    Benjamin ThompsonSep 2, 2025
    What to do if a master has not been correctly cut in Riso Printer?
    • A
      angela94Sep 3, 2025
      If a master has not been correctly cut in your Riso Printer, remove the master roll and close the Master Making Unit Cover. Then, set the master again.

Summary

Before Starting to Use

Safety Guides

Precautions for installation, handling, and operation of the machine.

Installation and Power Connection

Precautions and steps for installing and connecting the machine.

Functions for Master-Making

Image Processing and Scanning

Selecting image modes, pencil mode, and scanning levels.

Image Processing Modes

Enlargement, Reduction, and Side-by-Side Printing

Automatic Printing (Auto-Process)

Automating the master-making and printing sequence.

Functions for Printing

Proof Copies and Print Adjustments

Producing proof copies and adjusting print position and speed.

Producing Proof Copies

Advanced Features

Automatic Sorting into Groups (Program)

Printing in multiple sets from original documents using programmed features.

Program Modes: Single Page and Multi-Page

Details on Program A (Single Page) and Program B (Multi-Page) modes.

Program Printing Methods

Setting Up Programed Printing (Program A)

Setting up programed printing for single page mode.

Setting Up Programed Printing (Program B)

Setting up programed printing for multi-page mode.

Saving Program Settings

Retrieving Stored Programs

Modifying Stored Programs

Clearing Stored Programs

Protecting Confidential Documents

Discarding the master to protect confidential documents.

Changing Initial Settings

Modifying initial machine settings via Custom Setting Mode.

Maintenance and Troubleshooting

Cleaning Procedures

Troubleshooting Overview

Using Check & Error Display, indicators, and troubleshooting tips.

Operating Environments and Machine Handling

Operating Environment and Handling Safety

Originals Guidelines

Original Size, Weight, and Margins

Maximum Printing Areas

Printing Area Specifications and Restrictions

Control Panel Operation

Control Panel Key Functions

Control Panel Features

Detailed Control Panel Key Explanations

Basic Process Overview

Basic Operations - Preparing to Print

Setting Up Trays and Loading Paper

Managing Paper During Printing

Adding;Replacing Paper and Setting Receiving Tray

Printing from a Paper Document

Step-by-Step Printing Process

Step-by-step guide to print from a paper document.

Printing Computer Data

Printing Computer Data Procedure

Procedure for printing data created on a computer.

Scanning Originals with Pencils

Pencil Mode for Originals

Enlarging or Reducing Originals

Standard Ratio Enlargement;Reduction

Scanning Faint or Dark Originals

Scanning Level Adjustment

Side-by-Side Printing (2-Up)

Automatic Printing (Auto-Process)

Using the Auto-Process Function

Adjusting Print Position

Vertical and Horizontal Print Position Adjustment

Changing Print Speed

Print Speed Adjustment Settings

Replacing and Disposing Consumables

Replacing the Ink Cartridge

Replacing the Master Roll

Master Roll Replacement Procedure

Emptying the Master Disposal Box

Master Disposal Box Emptying

Print Drum (Cylinder) Replacement

Removing and Installing Print Drum

Maintenance and Cleaning

Safety Guide - Cleaning

Precautions to observe before cleaning the machine.

Troubleshooting - Check & Error Display

Check & Error Display Overview

Shows error locations and numbers indicating error types.

Understanding Error Indicators

Troubleshooting JAM Indicator

When JAM Indicator Blinks

Troubleshooting steps for a JAM indicator.

Troubleshooting CHECK SETTINGS Indicator

When CHECK SETTINGS Indicator Blinks

Troubleshooting steps for CHECK SETTINGS indicator.

Troubleshooting Indicator Lights

Common Indicator Light Issues

Troubleshooting H Display

Handling H Display on Print Quantity

Troubleshooting Error Type Indicators

When Error Type Indicators Light

Troubleshooting Tips

General Troubleshooting Advice

Common problems and their solutions before calling service.

Copy Quality Problems and Solutions

Tips for missing parts, blank lines, and background issues.

Smudged or Faint Image Troubleshooting

Tips for smudged or faint images, and blurred text.

Print Alignment and Paper Feed Issues

Tips for print alignment, paper sticking, and paper feed problems.

Paper Feed and Stripping Pressure Issues

Troubleshooting paper feed and stripping pressure related problems.

Indicator Lights and Start Issues

Troubleshooting for indicator lights and machine start-up issues.

Riso CZ100 Specifications

General IconGeneral
BrandRiso
ModelCZ100
CategoryPrinter
LanguageEnglish

Related product manuals