To Next PageTo Next PageHow to fix a paper jam on the paper feed tray section of Riso CZ100 Printer?
If a paper jam occurs on the Paper Feed Tray section of your Riso Printer, first, press the key to lower the Paper Feed Tray and remove the jammed paper. Then, set the paper again. If the error indications do not disappear, press the key.
How to set a master roll correctly in Riso CZ100 Printer?
If a master roll has not been correctly set in your Riso Printer, open the Master Making Unit Cover, remove the master roll, and set the master correctly. If the master is loose, turn the right flange inward to correct it, and close the Master Making Unit Cover.
How to correctly set a master in Riso Printer?
If a master has not been correctly set in your Riso Printer, open the Master Making Unit Cover, remove the master roll, and set the master correctly. If the master is loose, turn the right flange inward to correct it, and close the Master Making Unit Cover.
How to remove unnecessary master from the print drum cylinder of Riso CZ100 Printer?
If an unnecessary master remains on the Print Drum (Cylinder) of your Riso Printer, pull out the Print Drum (Cylinder). Press the Print Drum Release Lever and turn the Drum (Cylinder) until the clamp plate comes to the top. Press the Clamp Plate Release Lever to unlock the clamp plate and separate the Master from the Print Drum (Cylinder). Rotate the Print Drum until it is locked by the Print Drum Release Lever. Set the Print Drum into the machine. Open the Master Making Unit Cover and set the master again. Close the Master Making Unit Cover. Perform the master-making operation again.
What to do if the tray has run out of paper in Riso Printer?
If the tray has run out of paper in your Riso Printer, place paper on the Paper Feed Tray.
How to correctly wrap a master around the print drum cylinder of Riso Printer?
If a master has not been correctly wrapped around the Print Drum (Cylinder) of your Riso Printer, pull out the Print Drum (Cylinder). If no master is wrapped around the Print Drum (Cylinder), proceed to Step 6. If wrapped, proceed to Step 2. Press the Print Drum (Cylinder) Release Lever and turn the Drum (Cylinder) until the clamp plate comes to the top. Press the Clamp Plate Release Lever to unlock the clamp plate and separate the Master from the Print Drum (Cylinder). Rotate the Print Drum until it is locked by the Print Drum Release Lever. Set the Print Drum into the machine. Open the Master Making Unit Cover and set the master again. Close the Master Making Unit Cover. Perform the master-making operation again.
What to do if a master jam has occurred in the master disposal section of Riso Printer?
To address a master jam in the master disposal section of your Riso Printer, remove the Master Disposal Box and take out the jammed master. If you still cannot remove the jammed master, open the Master Disposal Unit and remove the master.
How to remove an original jam in the ADF unit of Riso CZ100?
If an original jam has occurred in the ADF Unit of your Riso Printer, remove the jammed original. Grasp the Original Release Lever and open the ADF Cover to remove the jammed original.
What to do if a paper jam has occurred on the paper receiving tray section of Riso CZ100?
To resolve a paper jam on the Paper Receiving Tray section of your Riso Printer, remove the jammed paper. If you've changed the horizontal paper position, adjust the position of the Receiving Tray Paper Guides as well. If the error indications persist, press the key.
Precautions for installation, handling, and operation of the machine.
Precautions and steps for installing and connecting the machine.
Selecting image modes, pencil mode, and scanning levels.
Automating the master-making and printing sequence.
Producing proof copies and adjusting print position and speed.
Printing in multiple sets from original documents using programmed features.
Details on Program A (Single Page) and Program B (Multi-Page) modes.
Setting up programed printing for single page mode.
Setting up programed printing for multi-page mode.
Discarding the master to protect confidential documents.
Modifying initial machine settings via Custom Setting Mode.
Using Check & Error Display, indicators, and troubleshooting tips.
Step-by-step guide to print from a paper document.
Procedure for printing data created on a computer.
Precautions to observe before cleaning the machine.
Shows error locations and numbers indicating error types.
Troubleshooting steps for a JAM indicator.
Troubleshooting steps for CHECK SETTINGS indicator.
Common problems and their solutions before calling service.
Tips for missing parts, blank lines, and background issues.
Tips for smudged or faint images, and blurred text.
Tips for print alignment, paper sticking, and paper feed problems.
Troubleshooting paper feed and stripping pressure related problems.
Troubleshooting for indicator lights and machine start-up issues.
General