What to do if Riso MZ Copier says 'Set Print Drum (Cylinder) in Place'?
If your Riso Copier displays 'Set Print Drum (Cylinder) in Place', it means the Print Drum (Cylinder) is either missing or not correctly installed. Properly install the Print Drum (Cylinder).
What to do if my Riso MZ Copier says 'No Ink'?
If your Riso Copier displays 'No Ink', it means the ink cartridge is empty. Replace the ink cartridge with a new one that is specifically designed for your machine. If the error continues, ensure the cartridge is properly installed.
What to do if Riso MZ says 'Master Disposal Box is Full'?
If your Riso Copier displays 'Master Disposal Box is Full', you need to empty the master disposal box.
What does 'Print Drum (Cylinder) has been Unlocked' mean on Riso Copier?
If your Riso Copier displays 'Print Drum (Cylinder) has been Unlocked', pull out the Print Drum (Cylinder).
How to resolve 'Wrong-type Ink Cartridge Installed' message on Riso MZ?
If your Riso Copier displays 'Wrong-type Ink Cartridge Installed', properly install a correct ink cartridge. Use only ink cartridges specifically designed and approved for use with this machine.
What to do if Riso MZ says '!! No Linked Printer Detected !!'?
If your Riso Copier displays '!! No Linked Printer Detected !!', check that the linked printer is switched on and that all cables are properly connected. If properly connected, check the server and network communication status and consult with the server and network communication administrator.
What should I do if my Riso MZ Copier says 'Close Master Making Unit Cover'?
If your Riso Copier displays 'Close Master Making Unit Cover', it means the cover is open or improperly installed. Pull out the Master Making Unit, check it, and firmly close the cover.
How to resolve 'Close the ADF Cover' message on Riso Copier?
If your Riso Copier displays 'Close the ADF Cover', it means the optional Auto Document Feeder DX-1 cover is open or incorrectly set. Check the ADF Cover and close it firmly.
What to do if Riso MZ says 'Rear Cover of Main Body is Off'?
If your Riso Copier displays 'Rear Cover of Main Body is Off', contact your dealer (or authorized service representative).
How to fix 'Master Mis-Feed' error on Riso Copier?
If your Riso Copier displays 'Master Mis-Feed', it means the master is not correctly installed. Pull out the Master Making Unit, rewind the master, and then reinstall it.
Precautions for machine installation and power connection.
Precautions for machine handling, operation, and environment.
Identifies and describes the main components of the machine.
Details the keys and functions of the machine's control panel.
Explains the various screens and their stages on the machine's display.
Steps for setting up the paper feed and receiving trays for printing.
Adjusts image processing based on original content (text, photo, etc.).
Options for resizing originals during master-making.
Adjusts the machine's printing speed from five levels.
Adjusts print position vertically and horizontally for each drum.
Configures user access levels, PIN codes, and other security settings.
Scans hard-copy originals to save as storage or USB Flash Drive data.
Retrieves and prints stored data from memory or USB drives.
Explains functions like Auto-Link and Link Mode for linked printers.
Automatically selects output device based on copy quantity.
Scans originals on the machine and prints via a linked printer.
Displays ink, master, and disposal box levels.
Step-by-step guide for replacing the master roll.
Step-by-step guide for replacing the ink cartridge.
Instructions for periodic cleaning of machine parts like the scanner glass and print head.
Identifies error messages and suggests actions to resolve them.
Lists and briefly describes available optional accessories for the machine.
Provides technical details and specifications for different machine models.
To Next Page
General
