Ritello R2 series - Ritello Operation Tips and Functions; Air Cleaning, Humidifying, and Aromatizing; Air Wash Timer Functionality; Attachment Caddy for Accessories

OPERATION TIPS
p6
Start by pressing the (I) button, then increase the speed
depending on the desired task by pressing on the (+)
button, and/or decrease the speed by pressing (-).
1. AIR CLEANING
Select the lowest speed "AIR". With pollution on the rise (specifically indoors), it is essential to wash the indoor-air with water. Simply,
pour water into the water basin up to the Min/Max level and let the Ritello purify the ambient air for you and your family.
2. HUMIDIFY & AROMATIZE
During certain periods of the year, the indoor air becomes dry and unpleasant. Turn your Ritello ON while using only the main unit
without any tools or the hose, add a few drops of the Ritello perfumes into the water-basin and smell the air instantly freshened.
(Use only genuine Ritello fragrances in the water basin).
3. AIR WASH TIMER
To activate your Ritello's Air Wash Timer, press and hold your finger on the "ON" button (Pic.a) for 6 seconds until the first triangles blink.
Once the first 2 triangles are blinking, wait another 6 seconds and the Ritello will turn on by itself for 30 minutes.
To increase the time for 60 minutes
Press and hold your finger on the "ON" button (Pic.a) for 6 seconds until the first 2 triangles blink, then immediately press the "+" button
(Pic.b) for the second 2-Trapeziums to blink. Once blinking, wait another 6 seconds and the Ritello will turn on by itself for 60 minutes.
(Do not increase the speed - Timer works only on the Air mode)
To increase the time for 90 minutes
Press and hold your finger on the "ON" button (Pic.a) for 6 seconds until the first 2 triangles blink, then immediately press the "+" button
(Pic.b) for the third 2-Trapeziums to blink. Once blinking, wait another 6 seconds and the Ritello will turn on by itself for 90 minutes.
To increase the time for 120 minutes
Press and hold your finger on the "ON" button (Pic.a) for 6 seconds until the first triangles blink, then immediately press the "+" button
(Pic.b) for the fourth triangles to blink. Once blinking, wait another 6 seconds and the Ritello will turn on by itself for 120 minutes.
4. ATTACHMENT CADDY
To keep your Ritello accessories handy, slip the Attachment Caddy at the backside of the Ritello onto the 2 slides located on both sides.
Press downward to lock in place. Insert each tool in its designated place as indicated by its resembling icon.
4