Do you have a question about the Rittal SK 3305.542 and is the answer not in the manual?
Model | SK 3305.542 |
---|---|
Power Supply | 230 V |
Frequency | 50/60 Hz |
Refrigerant | R134a |
Protection Class | IP 54 |
Rated Operating Voltage | 230 V |
Operating Temperature Range | +20°C to +55°C |
Information on associated documents, CE labelling, document retention, and symbols used.
Essential safety precautions for handling, assembly, and operation of the cooling unit.
Explanation of the cooling unit's working principle, components, and control systems.
Details on safety equipment, condensation management, filter mats, and interfaces.
Guidelines for correct operation and a list of items included in the product delivery.
Criteria for choosing an optimal location for the cooling unit installation.
Initial steps for assembly, including packaging checks and enclosure preparation.
Procedures for cutting enclosure panels and performing external/partial internal mounting.
Steps for full internal mounting and connecting the condensate discharge.
Key information on electrical connections, safety, and standards compliance.
Details on performing electrical installation, including bus and serial interface connections.
Guidance on completing the electrical installation by installing the power supply unit.
Steps for installing filter media, fitting the display, and setting the filter mat monitor.
Steps for initial commissioning, including powering up the unit and making basic settings.
Guide to using the Basic controller, including settings, display, and error indications.
Comprehensive guide for the Comfort controller, covering programming, parameters, and system messages.
Overview of maintenance procedures, cleaning, and component checks.
Specific instructions for cleaning components using compressed air.
Precautions for storing the unit and guidelines for environmentally sound disposal.
Detailed technical data, including voltage, current, capacity, and dimensions.
Illustrated catalog of replacement parts for various cooling unit models.
Tables and diagrams showing cut-out and hole sizes for different mounting types.