To Next PageTo Next Page
Need help?Do you have a question about the Rittal SK 3382.xxx and is the answer not in the manual?
General| Model | SK 3382.xxx |
|---|---|
| Category | Refrigerator |
| Power Supply | 230 V AC |
| Material | Sheet steel, powder-coated |
| Protection Class | IP54 |
| Refrigerant | R134a |
| Rated operating voltage | 230 V AC |
| Frequency | 50/60 Hz |
| Temperature Range | +5°C to +30°C |
| Installation | Wall-mounted |
Details associated documents like assembly and operating instructions.
Mentions declaration of conformity supplied with the unit.
Emphasizes keeping instructions as integral part of product.
Explains symbols for actions, danger, caution, and notes.
General safety precautions for assembly and operation.
Explains the purpose and function of enclosure cooling units.
Describes the refrigeration cycle and components.
Mentions the fitted controller for setting functions.
Describes serial interface for bus connection of multiple units.
Details safety features like pressure switch, temp monitoring, and thermal protection.
Explains condensation formation and automatic evaporation.
Discusses filter mats and their function/maintenance.
Describes the function and connection of a door limit switch.
Explains the use of an additional interface card for monitoring systems.
Defines correct use and warns against improper operation.
Lists the items included in the delivery.
Guidelines for selecting a suitable installation location.
General advice on checking packaging and enclosure sealing.
Guidance on arranging components to avoid condensation and air short-circuits.
Instructions for mounting the cooling unit on the enclosure roof.
Steps for cutting the enclosure roof according to the template.
Details on sealing and securing the cooling unit onto the enclosure.
Instructions for connecting the condensate discharge hose.
General guidance and regulations for electrical installation.
Electrical connection details for three-phase units.
Specifics on connecting door limit switches.
Adherence to flicker limits and supply impedance.
Guidance on potential equalisation for EMC.
General section for electrical installation steps.
Steps for completing electrical installation, including wiring plans.
Instructions for inserting filter mats.
Connecting the display and attaching the louvred grille.
Explains the filter mat monitor function.
Steps and precautions for commissioning the unit.
How to operate the unit using the e-Comfort controller.
Lists the properties and supported voltage variants of the controller.
Explains the energy-saving eco-mode function.
Describes how to activate the test mode.
Provides guidance on parameter programming and authorization.
Details editable parameters for the controller.
Visual guide to the programming sequence for parameters.
Explains system messages and their evaluation via relays.
Instructions for configuring master-slave relationships between units.
How system messages are indicated and what they mean.
Procedure to reset the controller after specific faults.
Overview of the unit's maintenance-free design and cleaning.
Instructions for cleaning using compressed air.
Warning about storage temperatures and upright positioning.
Notes on checking mains connection data on the rating plate.
Notes on checking pre-fuse specifications on the rating plate.
Spare parts diagram for specific unit models.
Spare parts diagram for specific unit models.
Spare parts diagram for specific unit models.
Diagrams showing assembly dimensions for various models.
