Need help?Do you have a question about the RiTTO Twinbus 1 7630 and is the answer not in the manual?
General| System | Twinbus |
|---|---|
| Model | 1 7630 |
| Brand | RiTTO |
| Power Supply | 24 V DC |
| Communication | 2-wire |
| Operating Temperature | -5°C to +40°C |
| Weight | 200 g |
Lists maximum allowed cable lengths for various TwinBus components based on wire diameter.
Highlights safety precautions and requirements for connecting the system to the 230V mains power.
Warns about the risk of equipment damage from static electricity and provides precautions.
Illustrates the step-by-step process for assembling the power supply unit and related devices.
Explains the basic setup for a door intercom system in residential buildings.
Illustrates installation for video systems with a single bus line and decentralized power.
Details installation for video systems using three bus lines and central power supply.
Outlines the sequence of operations for system start-up and initial configuration.
Describes the procedure for initiating the system using indoor units or apartment buttons.
Describes how to program switching commands for door opener operation.
Details the procedure for setting the door opener activation duration.
Explains how to set the operating mode, including the busy function.
Lists measurement points and target voltages for diagnosing TwinBus power supply and intercom modules.
Explains the operation of electronic fuses in power supply units and the reset procedure.
Details the meaning of LED indicators on the TwinBus power supply unit for diagnostics.
To Next Page
