Rivacold CO2NNEXT - Identification Plate

CO
2
NNEXT
rev.01
EN
81 / 293
3.1. Identification plate
For identification of the partly-completed machine a specific CE identification plate has been affixed; the
identification data shown on this plate must be reported to the Manufacturer's offices for each request for
intervention or for the ordering of spare parts. The identification plate contains the following data:
Example identification of serial number: Digit 1 and 2 =
last two digits of the year of construction;
Digit 3 and 4 = week of the year in which the partly-completed machine
was produced; Figures 5, 6, 7, 8 = progressive number.
NOTE: Additional plates may be available for partly-completed machine versions in which it is
necessary to specify: positive and/or negative refrigeration powers; different models of compressors;
pressures and operating temperatures.
1.
Partly-completed machine code
9.
Compressor
2.
Power supply voltage
10.
Horses
3.
Cooling capacity
11.
Absorption in amperes (A)
4.
Absorption in Watts
12.
-
5.
Type of coolant
13.
Refrigerant load
6.
Max. operating pressure (high pressure)
14.
Max. operating pressure (low pressure)
7.
Max. operating temperature (high pressure)
15.
Max. operating temperature (low pressure)
8.
Serial number