2
Chapter 1 General
information
x
Description of the assembly instructions, of their structure and of the
conventions used;
x
definition of the terms used;
x
definition of the relationship between the Manufacturer and the
Purchaser/User (in terms of warranty and assistance conditions).
Chapter 2
Introduction on safety
x
Presentation of general indications on the partly-
the solutions adopted for the protection of operating personnel;
x
Presentation of the residual risks present
Chapter 3
Description of the
partly-completed
x
Description of the partly-completed machine
x
presentation of the main technical data concerning the partly-
machine.
Chapter 4
Transport and Installation
x
Description of the methods for lifting and handling of the partly-
completed machine;
x
description of the installation methods, electrical connection and
commissioning of the partly-completed machine;
x
description of the mode of storage of the partly-completed machine.
x
Description of the partly-completed machine uninstallation.
Chapter 5
Maintenance and
demolition
x
Description of the verification and control procedures of the parts and
components of the partly-
completed machine (in particular, of the parts
most subject to wear);
x
description of the procedures that allow the designated personnel to
clean the partly-completed machine;
x
presentation of the instructions for disassembling, demolishing and
disposing of the partly-completed machine.
Chapter 6
Options
x
Description of the options available for installation on the partly-
Chapter 7
Troubleshooting
x
List of possible malfunctions of the partly-completed machine and the
related solutions.
Chapter 8
Annexes
x
Indications on the:
x
Technical datasheets of the possible versions of the partly-completed
machine;
x
refrigeration diagram;
x
documentation of components fitted to the partly-completed machine.
x
declaration of incorporation
Table 1 – Structure of the assembly instructions
To Next Page
Loading...
