RCMR Pag. 28 Rev. 02 02 13
UK
1.3.3 Operations that entail Expiry of the Warranty
Any attempt to disassemble, modify, or tamper with a component of the
PARTLY COMPLETED MACHINERY
made by the User or by
unauthorized personnel entails expiry of the warranty and absolves the Manufacturer of any responsibility concerning any possible
damages to persons and things a like that stem from such tampering.
The Manufacturer likewise deems itself absolved of any possible responsibility and cancels the warranty on the
PARTLY COMPLETED
MACHINERY
in the following circumstances:
unforeseen use of the
PARTLY COMPLETED MACHINERY
(in this respect, see Paragraph 3.5 – Proper and improper use of the
PARTLY
COMPLETED MACHINERY
in Chapter 3 – Safety and Technical Data);
use contrary to what established by the norms in force in the country where the machine is being used;
installation of the
PARTLY COMPLETED MACHINERY
in conditions differing from those specified in Chapter 4 – Transport and
Installation;
installation not compliant to the specifications reported in Chapter 4 – Transport and Installation;
total or partial inobservance of the instructions reported herein;
failure to perform or improper maintenance;
use of non-original spare parts or ones not specified by the Manufacturer.
1.4 Assistance
With regard to the maximum exploitation of the performances provided by the
PARTLY COMPLETED MACHINERY
and extraordinary
maintenance operations, these instructions do not replace the experience of the trained and qualified installers, users, and
maintenance workers.
In the case in point, the Technical Assistance Service of company R
IVACOLD S
.
R
.
L
. provides:
support over the phone concerning the characteristics and most simple interventions that can be performed on the
PARTLY
COMPLETED MACHINERY
;
forwarding of documentation;
ATTENTION: in case of doubts on how to correctly interpret the instructions reported in these assembly
instructions, consult the Technical Assistance Service (in the manner indicated below) to obtain the
NECESSARY
clarifications.
1.4.1 Request for Assistance
To speak with the Technical Assistance Service, contact:
T
ECHNICAL
O
FFICE OF THE COMPANY
R
IVACOLD S
.
R
.
L
.
Via Sicilia, 7
Fraz. Montecchio 61022 VALLEFOGLIA (PU)
I
TALY
Telephone: (+39) 0721 919911
Telefax: (+39) 0721 490015
When requesting the intervention of the assistance service, specify the name, model, and serial number of the
PARTLY COMPLETED
MACHINERY
.
2
2
.
.
D
D
e
e
s
s
c
c
r
r
i
i
p
p
t
t
i
i
o
o
n
n
o
o
f
f
t
t
h
h
e
e
p
p
a
a
r
r
t
t
l
l
y
y
c
c
o
o
m
m
p
p
l
l
e
e
t
t
e
e
d
d
m
m
a
a
c
c
h
h
i
i
n
n
e
e
r
r
y
y
The
PARTLY COMPLETED MACHINERY
discussed in this document is an
air-cooled evaporator designed and manufactured to be
incorporated in a refrigerating circuit arranged by the customer.
The
PARTLY COMPLETED MACHINERY
is available in different versions,
depending on the diameter of the fan motors; more specifically,
there are models with fan motors that have a diameter of 350 and
450 mm. All the versions are available with (ED models) or without
a defrosting heater.
Regardless of the configuration, at any rate, the
PARTLY COMPLETED
MACHINERY
is supplied without a control or power logic, because it
must be inserted in the refrigerating circuit arranged by the
customer. This is why it represents a
PARTLY COMPLETED MACHINERY
, as
defined by Machines' Directive 2006/42/CE: because it is not
capable of carrying out a well-defined application (without being inserted in a refrigerating circuit and without having a control or
power logic, it cannot perform the function for which it is manufactured). It can freely circulate on the market, because it is
accompanied by a correspondent declaration of incorporation by the manufacturer and by the correspondent assembly instructions,
that allow its simple integration in the final machine (which will then have to be marked CE, pursuant to the directives applicable to it,
by the subject making the integration).
To Next Page
Loading...