River INDIE - Page 15

15
Switchgear & Instrument Cluster
Headlamp Switch
High beam
Press to engage High Beam.
Note: Both the low beam and high beam will be ON in this
mode.
Low beam (Default position)
Press to switch back to low beam from high beam mode.
Pass (Retractable)
Push down gently to flash the High Beam.
Note:
The low and high beam is only engaged when the motor is
ON and the instrument cluster indicates Ready to Ride.
Blinker switch
• Toggle the Blinker switch to the right to engage the
blinkers on the right side of the scooter.
• Toggle the Blinker switch to the left to engage the
blinkers on the left side of the scooter.
• Click the Blinker switch at the centre position to
disengage the blinkers.
Horn button
Press for sounding the horn
Left Switchgear
River Indie User Manual | Know your Indie