21
It is recommended to check the below aspects before starting
the scooter to ensure a smooth and hassle-free ride experience.
1. Check your tire pressure and ensure that they are inflated to
the recommended level.
Front Tire : 28 psi (Solo & Pillion)
Rear Tire : 33 psi (Solo & Pillion)
CAUTION
• Do not ride on a flat tire as you will risk damage to the
alloy wheels.
• Do not ride with excessive tire pressure as it may affect
your ability to safely handle the scooter.
NOTICE
Riding the scooter with lower tire pressure may lead
to lower range. Always ensure that you check your tire
pressure once every two weeks.
Note:
• If the side stand is not fully retracted up, the motor
remains in OFF condition.
• If the side stand is deployed when the scooter is ON,
the instrument cluster will indicate the same with
this symbol.
Pre-ride check & Starting the Indie
2. Ensure that the charger is removed and stored in a
secure location.
3. Please ensure that the charger lid is closed properly.
4. Ensure that the wheels and rotating parts are free to move
without obstruction.
5. Turn the key ON and ensure that you have sufficient charge
before starting the scooter.
6. Always ensure the brake fluid level in both front and rear
reservoirs are above the minimum (MIN) mark.
7. Prioritise safety by ensuring that both the rider and pillion
wear their helmets while riding the scooter.
8. Get onto the scooter and retract the side stand.
River Indie User Manual | Riding the Indie
To Next Page
Loading...