22
9. Turn the key to ON position in the lockset. The vehicle
performs a self diagnostic check while the instrument cluster
initialises. This takes about two seconds.
10. Apply either of the brake levers and press the Start button
on the Start/Kill switch to turn ON the motor. The instrument
cluster should indicate Ready to Ride.
NOTICE
You will have to wait until the self diagnostic check
completes before you can proceed to the next step.
11. The vehicle always starts in the last riding mode which
was used.
12. Gently twist the throttle to start moving.
River Indie User Manual | Riding the Indie
To Next Page
Loading...