26
Entering hibernation
The vehicle can be put in hibernation mode only when the key is
ON and the motor is OFF.
1. To enable hibernation, press and hold the Park and Set
buttons together on the instrument cluster.
2. The sleep icon on the display should start blinking while
holding down these buttons.
3. Keep holding these buttons until the sleep icon stops
blinking and stays on.
CAUTION
To maintain good battery health, please charge your vehicle
up to 100% once in 90 days even if it has been kept in
hibernation mode. Failing to do so may result in voiding
your warranty.
NOTICE
• In hibernation mode, the vehicle status and location will
not be updated on the River App.
• You cannot charge the vehicle while in hibernation.
• If you are leaving your vehicle plugged in, there is no
need to trigger hibernation.
• It is recommended to maintain at least 30% charge
in the battery while leaving the vehicle unused for a
long duration.
Hibernation mode allows the Indie to further reduce the energy
consumed by the electronics when it is parked. This allows you
to have sufficient charge left when you use the vehicle after a
long break.
If you leave the vehicle idle without plugging in the charger, the
scooter will automatically enter hibernation mode after 7 days.
If you don’t expect to use the vehicle for long periods of time
(more than 7 days), you can manually put the vehicle into
hibernation mode to conserve charge.
Long term storage / Hibernation
• It is recommended to park the vehicle on the
centre-stand* (if equipped) if you are parking it for a longer
period of time.
• You cannot reset the trip meter while in Park mode.
River Indie User Manual | Riding the Indie
To Next Page
Loading...