The device described in the manual is the Rivers Edge® LOCKDOWN 2-MAN Ladder Stand, Model LD203, a treestand designed for hunting.
Function Description:
The LOCKDOWN 2-MAN Ladder Stand is an elevated hunting platform that allows two users to sit or stand at a height above the ground, providing a better vantage point for hunting. It is a ladder-style treestand, meaning it consists of multiple ladder sections that are assembled to reach the desired height, with a platform and seat at the top. The stand is secured to a tree using a system of straps, ratchets, and a stabilizer bar. A key feature is its "Ultimate Shooting Rail," which offers adjustable height and depth, and can be flipped down and tucked away into the platform for bow hunting. The stand is designed for stability and safety, emphasizing the mandatory use of a full body harness (FAS) and adherence to strict assembly, setup, and maintenance instructions.
Important Technical Specifications:
- Maximum Use Height: 17' 1" to shooting rail
- Maximum Occupancy: Two (2) people
- Total Weight Limit: 500 lbs (including user(s) and equipment)
- Tree Diameter Range: 12" to 30"
- Components: The stand comprises various parts including J-tubes, platform sections (front, middle, rear), bottom and top tree blades, armrests (left and right), seat support, backrest tubes and spreader, footrest, shooting rail (round with vinyl dip), adjustable shooting rail parts, ladder hand rails, platform braces, strap guides, stabilizer bar (telescoping), ladder sections (bottom, middle, top, and with stabilizer mount), ladder ratchets, Silent LadderLocks with stud, rubber bumper stops, and various nuts, bolts, washers, and spacers.
- Safety Equipment (Included/Required): Full Body Harness (FAS), long straps (17 ft), 8 ft ratchet straps with S-hooks, tether rope, and a large carabiner.
- Tools Required for Assembly: 7/16" wrenches (2) and a 4 MM Allen wrench (included).
Usage Features:
- Two-Person Capacity: Designed to safely accommodate two hunters.
- Adjustable Shooting Rail: The shooting rail can be adjusted up/down and in/out. It also features a "tucked-away" position, where it can be flipped down and slid into the platform, making it suitable for bow hunting by providing an unobstructed view.
- Ladder Stand Design: Provides a stable and secure climbing method to the elevated platform.
- Stabilization System: Utilizes a telescoping stabilizer bar, long straps, and ratchet straps to firmly secure the stand to the tree.
- Ground-Level Assembly: All assembly must be completed at ground level before uprighting the stand.
- Three-Point Contact: Users are instructed to maintain three points of contact (two feet, one hand; or one foot, two hands) when climbing the ladder.
- Harness Requirement: A full body harness (FAS) is mandatory and must be worn at all times after leaving the ground, and attached to the tree before stepping onto the platform.
- Pre-Climb Checks: Emphasizes checking ladder section connections, ground stability, and ensuring tree blades and stabilizer bar are contacting the tree before climbing.
- Haul Line: The tether rope can be used as a haul line to pull gear up to the stand after installation.
Maintenance Features:
- Pre-Use Inspection: Before each use, a thorough inspection is required, including checking all webbing, rope, cord, strap assemblies, cables, hardware, chain components, and for any structural damage, rust, corrosion, cracks, or loose nut and bolt assemblies.
- Lubrication: Pivot and slide-together points should be lubricated with powder graphite, petroleum jelly, or silicone spray to prevent noise, wear, and rust.
- Replacement Parts: Any questionable components must be replaced immediately with original RETI replacement parts.
- Strap Replacement: All treestand straps must be replaced every two years or when any signs of damage or wear exist.
- No Modifications: Users are strictly warned against modifying the treestand in any way, making repairs, replacing parts, or altering it unless explicitly authorized in writing by the manufacturer.
- Annual Review: Instructions (written and video) should be kept in a safe place and reviewed at least annually.
- Warranty: RETI offers a one-year warranty for all components to the original owner with proof of purchase, covering manufacturing defects but not normal wear and tear, abuse, or unauthorized modifications. Warranty service requires prior approval and an RMA#.
- Online Parts: Parts can be ordered online at www.HuntRiversEdge.com or by calling customer service.
To Next Page
Need help?
General
