RKI Instruments Beacon 110 - Specifications; Beacon 110 Specifications

2 Beacon 110 Operator’s Manual
Specifications
Table 1 lists specifications for the Beacon 110.
Table 1: Beacon 110 Specifications
Input Power 100/115/220V ~ ±10%, 50/60Hz, 0.2/0.2/0.1A
or
24 V ± 10%, 0.5A
Construction (housing) Fiberglass/polyester with lexan window (NEMA 4X)
Dimensions 8.5 in. H x 6.5 in. W x 4.5 in. D
(216 mm H x 165 mm W x 108 mm D)
Weight 4.2 lbs.
Safety/Regulatory
C US
186718
Environmental Conditions • For indoor or outdoor locations (Type 4X)
• -20°C to 50°C (-4°F to 122°F) ambient
• Maximum relative humidity of 80%
• Main supply voltage fluctuations not exceeding ± 10% of nominal
• DC supply voltage fluctuations not exceeding ±10% of nominal
• Overvoltage Category II, Pollution Degree 2
Relays • Relay contacts rated for 10A @ 115/220V~ resistive or 10A @ 30V
resistive
• SPDT Form C
User Controls • Three push button control switches
• One ON/OFF toggle switch
• One push button reset switch
Signal Output • 4 to 20 mA, 500 ohms impedance max