User's Guide Fireface UCX © RME
73
27.8.3 OSC Page
The OSC page has settings for MIDI remote control via Open Sound Control (OSC). This is a
network based remote protocol that can be used for example by Apple’s iPad with the app
TouchOSC to wirelessly remote control TotalMix FX running on a Mac or Windows computer.
TotalMix FX OSC Service
¾ IP. Shows the network address of the
computer running TotalMix FX (local
host). This address must be entered
on the remote side.
¾ Host Name. Local computer name.
¾ Port incoming. Must match the
remote entry ‘Port outgoing’. Typical
values are 7001 or 8000.
¾ Port outgoing. Must match the remote
entry ‘Port incoming’. Typical values
are 9001 or 9000.
Remote Control
¾ IP or Host name. Enter the IP or host
name of the remote control. Please
note that the IP number usually works
better than the host name.
Options
¾ Send Peak Level. Activates the
transmission of the peak level meter
data. Peak Hold activates the peak
hold function as set up for the TotalMix
level meters in the preferences.
To Next Page
Loading...
