RND 320-KD3305P - Main Features; Safety Instruction

2 3
Main Features
• 30VX2,5V/3.3V/2/SVX1
• l0MVlmA hight accuracy resolution dc power supply
• Low noise
• Heatsink temperature
• Constant voltage
• Digital panel control
• 4 digits display
• Softwarecalibration
• Buttonlockfunction
• Output ON/OFF control
• standard interfaces: USB, RS232 & LAN
Safety Instruction
Safety Guidelines
• Do not block or obstruct the cooling fan vent opening.
• Avoid severe impacts or rough handling that leads to
damage.
• Do not discharge static electricity .
• Donotdisassembleunlessyouarequaliedas
service personnel.
• AC I nut Voltage: 110V / 120V / 220V / 230V ,
50 / 60 Hz
• Connect the protective grounding conductor of AC
power cord to an earth ground, to avoid
the electrical shock.
• Location: Indoor, no direct sunlight, dust free, almost
non-conductive pollution (note below)
• Relative Humidity:< 80%
• Altitude:< 2000m
• Temperature: 32 - 104° F
AC INPUT
!
Operation
Environment
Storage
Environment
FUSE
!
Model 110/120V 220/230V
KD3305 T5A/250V T3A/250V
• Toensurereprotection,replacethefuseonlywiththespeciedtype
and rating.
• Disconnect the power cord before fuse replacement.
• Makesurethecauseoffuseblowoutisxedbeforefusereplacement.
• Location: Indoor
• Relative Humidity: <70%
• Temperature:-10-70 C