RoadHog RH48200 - SAFETY PRECAUTIONS; MANDATORY SAFETY SHUTDOWN PROCEDURE

5
SAFETY
PRECAUTIONS
ACCIDENTS ARE
PREVENTABLE WITH YOUR HELP
Understand and comply with applicable
laws and regulations.
 Call local utilities before you dig.
1-888-258-0808
 Know the location of underground gas, water
and electrical lines.
 Inspect area for holes, drop-offs, or unstable
ground.
 Know the weight limitations of operating
surfaces and clearances.
 Remember: Safe operation begins with the
operator.
BEFORE OPERATING THIS
EQUIPMENT, THE FOLLOWING
SAFETY INFORMATION SHOULD BE
READ AND UNDERSTOOD. IN
ADDITION, EACH INDIVIDUAL
WORKING WITH THE EQUIPMENT
SHOULD BE FAMILIAR WITH THE
SAFETY PRECAUTIONS
Exercise extreme caution when attaching and removing the attachment, operating with
other workers present, and servicing the unit.
Roadhog Inc makes operator safety a priority when designing machinery. Exposed
moving parts are guarded whenever possible for safety. However, not all moving parts
can be shielded in order to ensure proper operation. This operator’s manual and safety
decals on the machine provide important safety information when observed closely If
safety decals become difficult to read, replace them immediately. (see “Safety De-
cals”).
MANDATORY SAFETY
SHUTDOWN
PROCEDURE
BEFORE cleaning, adjusting, lubricat-
ing, or servicing this unit, ALWAYS fol-
low the MANDATORY SAFETY SHUT-
DOWN PROCEDURE:
1. Lower loader arms and roll attach-
ment forward until it is flat on the
ground.
2. Apply loader parking brake and stop
the loader engine.
3. Remove loader key and keep with
you while you are working on the at-
tachment.
4. Turn cold planer engine off and lock
control panel using the PIN security
feature.
FAILURE TO FOLLOW THE
PROCEDURES BEFORE CLEANING,
ADJUSTING, LUBRICATING, OR
SERVICING THIS UNIT COULD LEAD
TO SERIOUS INJURY OR DEATH.
WARNING
WARNING