Roadstar CDR-375D+ - USB OPERATION; Connecting and Playing USB Devices; AUX IN OPERATION; Connecting External Audio Devices

5 English
Press [PROG] (12) again to confirm desired track into the program memory;
Repeat step 3 and 4 to enter additional tracks into the program memory;
When all the desired tracks have been programmed, press [PLAY] (3) to play the disc
in the order you have programmed;
Press [STOP] (4) twice to terminate programmed play.
USB OPERATION
Select “CD” mode by pressing the [FUNCTION] button (2);
Plug an USB device into the [USB SOCKET] (16);
Playback will start automatically from the first track.
PROGRAMMING
The PROGRAMMING operation is the same as that of CD-MP3.
Note: Some mp3 player may not be able to play via the usb socket. this is not a maul-
function of the system.
Note: To avoid damage to USB memory, remove it only when the radio is turned off.
AUX IN OPERATION
Select “AUX” mode by pressing the [FUNCTION] button (2);
Use one male to male 3.5mm jack cable (not included) to connect any external au-
dio device to the AUX-IN socket (17).
Note: Music control (play, pause, etc) must be done from your external device.