Need help?Do you have a question about the Roadstar HRA-1200W and is the answer not in the manual?
To reduce the risk of electric shock, do not remove the cover. Refer all servicing to qualified personnel.
Unit operates on 230V~50Hz; unplug if unused for long periods. Avoid moisture, rain, direct sunlight, and heat sources.
Ensure all connections are proper. Position unit for proper ventilation, avoiding curtains or built-in installations.
Unit designed for AC 230V 50Hz current only. Connecting to other power sources may damage the unit.
Do not expose unit to rain or moisture. Unit is double insulated; earth connection is not required.
Connect the plug to a mains power inlet 230V AC ~ 50 Hz.
Insert six UM-4 batteries following polarity. Remove batteries if unit is unused for some time.
Select AM/FM band. Tune to station using tuning control. Adjust volume. Turn off by setting selector to OFF.
Extend telescopic FM antenna for best reception. For MW, orient unit to utilize built-in ferrite antenna.
Details power supply (230V~50Hz) and radio frequency coverage (FM: 87.5-108MHz, MW: 530-1600kHz).
To Next Page
General