EasyManuals Logo

Roadstar RCR-777UD+ User Manual

Roadstar RCR-777UD+
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
3 English
CLOCK AND DATE SETTING
In stand-by mode:
1. Press and hold the [CLOCK/ENTER] button (3) until the display shows "12/24
Hr";
2. Press the [SKIP -/+] buttons (5/6) to choose 12 or 24 hour format;
3. Confirm with the [CLOCK/ENTER] button (3);
4. Press the [SKIP -/+] buttons (5/6) to adjust the hour;
5. Confirm with the [CLOCK/ENTER] button (3);
6. Press the [SKIP -/+] buttons (5/6) to adjust the minutes;
7. Confirm with the [CLOCK/ENTER] button (3);
8. Repeat steps 2 and 3 to set the date.
ALARM SETTING
In stand-by mode:
1. Press and hold the [ALARM 1] button (7) to enter into the Alarm setting.
2. Press the [SKIP -/+] buttons (5/6) to adjust the hour;
3. Confirm with the [ALARM 1] button (7);
4. Press the [SKIP -/+] buttons (5/6) to adjust the minutes;
5. Confirm with the [ALARM 1] button (7);
6. Press the [SKIP -/+] buttons (5/6) to choose the alarm mode (Buzzer, FM, DAB,
CD or USB);
7. Confirm with the [ALARM 1] button (7);
8. Press the [SKIP -/+] buttons (5/6) to adjust the volume;
9. Confirm with the [ALARM 1] button (7).
To set the second Alarm, repeat all the steps with [ALARM 2] (8) instead of [ALARM
1].
Note: To deactivate the Alarm, press the [ALARM 1] button (7) (the alarm will
stop, but the setting will remain). To remove the settings, in stand-by mode, press re-
peatedly the [ALARM 1] button (7) until you see “Alarm off”.
TO USE THE RADIO
1. Press the [POWER] button (2) to power on the unit;
2. Select the desired audio source;
3. (Please see detailed instructions for each Source in the following chapters);
4. Adjust the volume with the [VOLUME -/+] buttons (7/8) to the desired level;
5. Press & hold the [POWER] button (2) to turn OFF the unit.
DAB RADIO OPERATION
1. Select “DAB” mode by pressing the [FUNCTION] button (2);
2. (The first time you select this function, the radio will scan the DAB radio stations
automatically. It will display and play the first station after the scan is done);
3. In case the display shows “No DAB Service”, press & hold the [AMS] button (11)
to start automatic scan;
4. To select the desired radio station press repeatedly the [SKIP -/+] buttons (5/6).
PRESET
You can program a maximum of 30 preset radio stations.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Roadstar RCR-777UD+ and is the answer not in the manual?

Roadstar RCR-777UD+ Specifications

General IconGeneral
BrandRoadstar
ModelRCR-777UD+
CategoryPortable Stereo System
LanguageEnglish

Related product manuals