5 English
7. Press [STOP] (4) twice to terminate programmed play.
USB OPERATION
1. Select “CD” mode by pressing the [FUNCTION] button (2);
2. Plug an USB device into the USB socket (16);
3. Playback will start automatically from the first track.
PROGRAMMING
The PROGRAMMING operation is the same as that of CD-MP3.
Note: Some mp3 player may not be able to play via the usb socket. this is not a
maul-function of the system.
Note: To avoid damage to USB memory, remove it only when the radio is turned
off.
REPEAT - RANDOM
Press repeatedly [AMS/MODE] button (11) to select the desired playback mode (only
for CD and USB mode).
AUX IN OPERATION
1. Select “AUX” mode by pressing the [FUNCTION] button (2);
2. Use one male to male 3.5mm jack cable (not included) to connect any external
audio device to the AUX-IN socket (17).
Note: Music control (play, pause, etc) must be done from your external device.
To Next Page
Loading...
Need help?
General
