To adjust Time-2, push B in Time-2 mode at least 1 second, hands are placed at 10h10
and hours are ashing. To change hours/minutes use A button, to set and conrm
push B. Note: Time-2 is always in 30min intervals relative to Time-1.
A
C
B
hours
minutes
Time-2Parameter
To edit Param, push A to conrm mode Param and A again to adjust ashing display
followed by pushing B to set and conrm 12h/24h, m/ft and chime --/on. Push B to
jump to Time-1 setting or push C to exit settings mode.
A
C
B
chime --/on
unit m/ft
unit °C/°F
1716
!" #$ %&'( &$&)
To Next Page
Loading...