Why is the light "OFF" after pressing the light button on my Robam Ventilation Hood?
If the light on your Robam Ventilation Hood turns off immediately after pressing the light button, it's possible that the light is damaged or poorly connected. Check the light for damage or connection issues.
How to fix abnormal sound during impeller running on Robam CXW-200-A818?
If you notice an abnormal sound during impeller running on your Robam Ventilation Hood, it could be that the impeller is loose or the cap isn't tightened properly. Ensure that the impeller is properly secured and the cap is tightened.
Why is there no oil in the oil cup of my Robam CXW-200-A818?
If there's no oil in the oil cup of your Robam Ventilation Hood after a period of time, it might be because the hood body is tilted. Make sure that the hood is installed in a level position.
General| Control Type | Touch Control |
|---|---|
| Lighting | LED |
| Motor Power | 200 W |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Lighting Power | 2 W |
| Type | Range Hood |
| Mounting Type | Wall Mounted |
| Material | Stainless Steel |
| Installation Type | Wall Mounted |
To Next Page