Need help?Do you have a question about the Robe Color Spot 1200 AT and is the answer not in the manual?
Identifies ports and connectors on the rear of the fixture base.
Identifies controls and indicators on the front of the fixture base.
Instructions for connecting the fixture to the main power supply.
Guide to adjusting power settings for magnetic ballasts.
Details DMX channel assignments and functions for Mode 1.
Details DMX channel assignments and functions for Mode 2.
Explains how to set the DMX start address for each fixture.
Overview of functions controllable via DMX or control panel.
Settings for customizing fixture behavior and user profiles.
Allows selection of DMX channel configurations (Mode 1 or Mode 2).
Accessing preset effects or controlling channels manually.
Configuring programs for standalone operation without a controller.
Options for resetting fixture modules or the entire unit.
Detailed instructions for setting DMX address and Ethernet/IP configuration.
Menu for accessing operational data like power on time and lamp hours.
Instructions for switching the lamp on and off.
How to run demo-test sequences without an external controller.
Menu for lamp adjustment and effect calibration.
Explains the 'Active Lamp Timer' error message.
Explains the 'Lamp Error' message, indicating potential lamp or ballast issues.
Explains the 'Lamp Sensor Error' message.
Indicates a fan is operating outside its normal speed range.
Indicates a fan has stopped working.
Appears if the fixture was briefly disconnected from the main power.
Appears if the supply frequency is not standard 50 or 60 Hz.
Informs of a conflict when addressed as master with DMX signal input.
General error for components like Color Wheel or Gobo 2 Index.
Indicates magnetic sensor issues, potentially with wires or motors.
Error related to the color wheel's default position.
Error related to Gobo Wheel 1's default position.
Error related to Gobo Wheel 1 indexing.
Error related to Gobo Wheel 2's default position.
Error related to Gobo Wheel 2 indexing.
Error related to the effect wheel's default position.
Error related to effect wheel indexing.
Error related to the iris lamellas' default positions.
Error related to CMY module's cyan lamellas.
Error related to CMY module's magenta lamellas.
Error related to CMY module's yellow lamellas.
Error related to CTO module's lamellas.
Error related to the zoom module's default position.
Error related to the focus module's default position.
Error related to the yoke's default position.
Error related to the head's default position.
Electrical specifications including voltage and fuse ratings.
Details about the recommended lamp type and its specifications.
Information about the fixture's lens and beam characteristics.
Description of the CMY color mixing system.
Specifications of the colour wheel and its filters.
Details about the first rotating gobo wheel and its gobos.
Details about the second rotating gobo wheel and its gobos.
Specifications for the effect wheel, prisms, and macros.
Specifications for strobe effects and pulse patterns.
Details about the dimming control.
Information on the frost effect.
Specifications for motorized focus and zoom.
Details on the motorized iris.
Information on the stepping motors used in the fixture.
Overview of the fixture's electronic components and features.
Ports for DMX and Ethernet connectivity.
Specifications for pan and tilt movement.
Guidelines and options for mounting and rigging the fixture.
Maximum operating temperatures for ambient and housing.
Safety distances required from flammable surfaces and objects.
Physical dimensions and weight of the fixture.
List of optional accessories available for the fixture.
Graph showing beam opening at 13° with minimum zoom.
Graph showing beam opening at 13° with frost effect.
Graph showing beam intensity distribution at 5m with frost.
Graph showing beam opening at 42° with maximum zoom.
Graph showing beam opening at 42° with frost effect.
Graph showing beam intensity distribution at 5m with frost.
Step-by-step guide for replacing the fuse in the fixture.
Identifies ports and connectors on the rear of the fixture base.
Identifies controls and indicators on the front of the fixture base.
Instructions for connecting the fixture to the main power supply.
Guide to adjusting power settings for magnetic ballasts.
Details DMX channel assignments and functions for Mode 1.
Details DMX channel assignments and functions for Mode 2.
Explains how to set the DMX start address for each fixture.
Overview of functions controllable via DMX or control panel.
Settings for customizing fixture behavior and user profiles.
Allows selection of DMX channel configurations (Mode 1 or Mode 2).
Accessing preset effects or controlling channels manually.
Configuring programs for standalone operation without a controller.
Options for resetting fixture modules or the entire unit.
Detailed instructions for setting DMX address and Ethernet/IP configuration.
Menu for accessing operational data like power on time and lamp hours.
Instructions for switching the lamp on and off.
How to run demo-test sequences without an external controller.
Menu for lamp adjustment and effect calibration.
Explains the 'Active Lamp Timer' error message.
Explains the 'Lamp Error' message, indicating potential lamp or ballast issues.
Explains the 'Lamp Sensor Error' message.
Indicates a fan is operating outside its normal speed range.
Indicates a fan has stopped working.
Appears if the fixture was briefly disconnected from the main power.
Appears if the supply frequency is not standard 50 or 60 Hz.
Informs of a conflict when addressed as master with DMX signal input.
General error for components like Color Wheel or Gobo 2 Index.
Indicates magnetic sensor issues, potentially with wires or motors.
Error related to the color wheel's default position.
Error related to Gobo Wheel 1's default position.
Error related to Gobo Wheel 1 indexing.
Error related to Gobo Wheel 2's default position.
Error related to Gobo Wheel 2 indexing.
Error related to the effect wheel's default position.
Error related to effect wheel indexing.
Error related to the iris lamellas' default positions.
Error related to CMY module's cyan lamellas.
Error related to CMY module's magenta lamellas.
Error related to CMY module's yellow lamellas.
Error related to CTO module's lamellas.
Error related to the zoom module's default position.
Error related to the focus module's default position.
Error related to the yoke's default position.
Error related to the head's default position.
Electrical specifications including voltage and fuse ratings.
Details about the recommended lamp type and its specifications.
Information about the fixture's lens and beam characteristics.
Description of the CMY color mixing system.
Specifications of the colour wheel and its filters.
Details about the first rotating gobo wheel and its gobos.
Details about the second rotating gobo wheel and its gobos.
Specifications for the effect wheel, prisms, and macros.
Specifications for strobe effects and pulse patterns.
Details about the dimming control.
Information on the frost effect.
Specifications for motorized focus and zoom.
Details on the motorized iris.
Information on the stepping motors used in the fixture.
Overview of the fixture's electronic components and features.
Ports for DMX and Ethernet connectivity.
Specifications for pan and tilt movement.
Guidelines and options for mounting and rigging the fixture.
Maximum operating temperatures for ambient and housing.
Safety distances required from flammable surfaces and objects.
Physical dimensions and weight of the fixture.
List of optional accessories available for the fixture.
Graph showing beam opening at 13° with minimum zoom.
Graph showing beam opening at 13° with frost effect.
Graph showing beam intensity distribution at 5m with frost.
Graph showing beam opening at 42° with maximum zoom.
Graph showing beam opening at 42° with frost effect.
Graph showing beam intensity distribution at 5m with frost.
Step-by-step guide for replacing the fuse in the fixture.
General| Type | Moving Head |
|---|---|
| Frost | Yes |
| Color | CMY + Colour Wheel |
| Gobos | Rotating gobos, replaceable |
| Prism | 3-facet rotating prism |
| Control Protocol | DMX512 |
| Effects | Rotating Gobos, Prism |
To Next Page
