7
button one more time will release the control of output volume.
Note:
(a) This FAZE 800 FT PRO machine comes with the memory function, therefore the set up VOLUME does
exist in the machine. This can help to save some time for setting up. When the machine plugs in next time
the set up will remain as the previous usage unless delete the record or reset.
(b) Set up output between 2% to 100% range this FAZE 800 FT PRO machine will be continuously output of
fog without necessary to stop the machine for re-warming up.
5. When the LCD panel displays “Ready To Faze” push the FUNCTION button ve times, LCD panel will
display “ Fan Speed 20% ”. During this time, use can use either the arrow UP and arrow DOWN buttons to
adjust the speed of the fan.
While the machine is still in operation, the fan will work according to the user’s set up, but when the machine
stop the operation to standby mode, the fan speed will adjust back to the 20% output speed in order to mini-
mize the noise from machine operation.
6. When the LCD panel displays “Ready To Faze” push the FUNCTION button six times.During this time the
LCD panel will display “DMX 512”, during this time, push either the arrow UP and arrow DOWN button will be
able to set the DMX address. The FAZE 800 FT PRO machine provide two channels one for fog output volume
and the other is for the fan speed. The details will be described in the DMX operation setup.
7. There is a air pump sensor built in the FAZE 800 FT PRO machine, by pushing the MANUAL button then
to connect the cable plug to turn on the machine in the same time will enable the LCD panel displaying “Air-
pump Sensor On”. During this mode, pushing either the arrow UP and arrow DOWN button will be enable
the user to choose On or Off function.This sensor is a very important protecting feature. Under the proper
operation mode, please ensure the sensor is On.
6. DMX control
While the machine connecting to DMX system, it does not support the operation of control panel.
On the operation control panel there are 3 Pin and 5 Pin two sets of DMX connection available. Each FAZE
800 FT PRO machine takes two channels automatically, one for output volume and the other for fan speed.
( for example, if we set up DMX 319 for output volume and then the DMX320 will control Fan speed )
Please refer to the table.
Channel Value Function
1
0 - 5
6-255
Volume control
Off
Volume control from min. (2%) to max. (100%)
2 0 - 255
Fan speed
Speed control from min. (20%) to max. (100%)
Fog Fluid:
Please use the Robe fog liquid – to ensure the satisfactory high sensibility and thin fog.
7. Very important notes
1. FAZE 800 FT PRO machine also features self cleaning liquid tube function automatically, when
the machine is not under operation, please keep the machine pluging in for another while. Let it stand for
another 5 minutes in order for the air internally to bring out the rest of the liquid within the liquid tube line.
( Generally speaking it takes about 3 minutes to complete this automatic cleaning function)
2. Please regularly clean up the ventilation lter at the bottom of the machine. Also during operating the ma-
chine, make sure clean surface, no dust nor particles to block the air in smoothly.
To Next Page
Loading...