What to do if Roberine R302 Lawn Mower won't start and says activate parking brake?
If your Roberine Lawn Mower displays a message to activate the parking brake and won't start, it's likely because the parking brake is not currently applied. To resolve this, ensure that you fully engage the parking brake.
Why Roberine R302 Lawn Mower says 'Turn off mow switch to start'?
The Roberine Lawn Mower displays 'Turn off mow switch to start' because the mowing switch is currently in the mowing position. You need to turn off the mow switch to start the engine.
How to fix Roberine Lawn Mower when it says 'Turn off backlap switch to start'?
If your Roberine Lawn Mower shows the message 'Turn off backlap switch to start', it means the mowing switch is in the backlapping position. To proceed, you must turn off the backlap switch.
What to do if Roberine R302 says 'Turn off towing to start'?
If your Roberine Lawn Mower displays the message 'Turn off towing to start', it indicates that the ball valve is in the towing position. To start the mower, you need to turn off the towing function.
Details risks of losing control and tipping over on inclines, stressing careful operation.
Provides essential safety guidelines for operating the mower, including engine operation and driving.
Warns about risks associated with mowing units, including contact with blades and thrown objects.
Highlights dangers to children around the mower, emphasizing they don't understand rotating blade risks.
Explains how to perform an emergency stop by removing foot from pedal and using parking brake.
Defines the driver's responsibilities for safe operation, training, and adherence to instructions.
Displays diagnostic codes for diesel engine faults, referencing the engine manual.
Outlines the five steps involved in the diesel engine's DPF regeneration process.
Explains how alarm messages appear on the screen and how to dismiss them.
Shows possible alarms and Mow ECU status, explaining how alarms are indicated.
Describes warnings and alarms related to the machine's tilt angle on inclines.
Explains how the machine executes 'Reset regeneration' and how the operator can postpone it.
Details the 'Recovery regeneration' process, which occurs when regeneration is postponed too often.
Checklist of essential items to verify before operating the mower for the first time.
Specifies the required diesel properties and cautions regarding fuel additives and biodiesel.
Procedure to test the mowing switch safety circuit's functionality.
Tests the general functionality of the parking brake, especially on inclines.
Instructions for testing all safety systems before machine use to ensure proper function.
Procedure to test the seat safety mechanism's function.
A comprehensive checklist of daily inspections required before operating the mower.
Procedure to test the drive pedal safety mechanism's neutral position function.
Tests the parking brake safety switch functionality.
Provides instructions for starting the mower's engine, including pre-start checks.
Step-by-step guide on how to lower the mowing units for operation.
Detailed steps and measurements for adjusting the cutting height on mowing units.
Step-by-step guide for turning on the engine, including seat belt and parking brake engagement.
Step-by-step guide on how to raise the mowing units.
Covers basic driving instructions for forward and reverse movement.
Introduces the process of adjusting the cutting height of the mowing units.
Introduction to operating the mowing units, including pre-operation checks.
Introduces maintenance interval tables for routine servicing of the mower.
Step-by-step procedure for safely removing and installing a new battery.
Routine checks and cleaning procedures to be performed daily.
Procedure for cleaning the mowing units after each use, including lubrication.
Procedure for checking the coolant level in the recovery tank, with safety warnings.
Instructions for checking the battery's charge status using an indicator.
Step-by-step procedure for checking the engine oil level using the dipstick.
Procedure for changing the engine oil and oil filter, including capacity details.
Guidance on checking flail wear and procedures for replacing worn or damaged flails.
Procedure for adjusting the cutting knife clearance relative to the bed knife.
Detailed steps for performing back lapping on mowing units, requiring experienced technicians.
Safety warnings and steps for refuelling the mower's fuel tank.
Highlights the importance of back lapping for cutting unit longevity and quality.
Steps to prepare the mower for storage, including cleaning, repairs, and rust prevention.
Procedures for storing the fuel and engine if the machine is unused for over 60 days.
Safety system checks required when taking the machine out of storage.
Lists safety-related system messages and their causes, guiding troubleshooting.
Addresses issues like difficult starting, engine overheating, and their potential causes.
Diagnoses common engine problems like poor performance or failure to start.
General| Brand | Roberine |
|---|---|
| Model | R302 |
| Category | Lawn Mower |
| Language | English |
To Next Page
