EasyManua.ls Logo

Robern VANITY Series User Manual

Default Icon
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
rev. 4/9/10 © 2010 Robern, Inc.209-1126
VANITY SERIES / SÉRIES DE VANITÉ / SERIE DE GABINETES
800.877.2376 www.robern.com Cabfax 1126
VANITY SERIES
SÉRIES DE VANITÉ
SERIE DE GABINETES
209-1126
Robern, Inc.
701 N. Wilson Ave.
Bristol, PA 19007 U.S.A.
1.800.877.2376
INSTALLATION / INSTALLATION / INSTALACIÓN
This instruction manual contains information
on how to install the Robern Vanity Series.
This series comes in several sizes and varia-
tions. Electrical option(s) may be provided
with your vanity(s). The vanity series are
modular and can be mounted individually or
ganged together.
The Vanity series needs special site prepara-
tion. Do not install vanities until all fram-
ing, plumbing and electrical options rough-
ins have been completed and wall surface
has been nished. We recommend using the
services of a professional installer. Observe
all the local building codes.
Save these instructions for future use and ref-
erence. An improper installation voids the war-
ranty. Installed cabinets cannot be returned.
If you experience any problems with your cab-
inet, contact your dealer or Robern directly.
Limited Warranty — One Year Term
15 1/2”
394mm
21 3/4”
552mm
21 3/4”
552mm
7”
178mm
Ce manuel d’instructions contient de
l’information sur comment installer les séries
de vanité de Robern. Ces séries sont disponibles
en plusieurs tailles et variations. Des options
électriques peuvent être offertes avec votre
vanité. Les séries de vanité sont modulaires et
peuvent être montées séparément ou regroupées
ensemble.
Les séries de vanité nécessitent une préparation
spéciale de leur emplacement. N’installez
pas de vanité tant que tous les emplacements
pour le cadrage, la plomberie et les options
électriques et les surfaces murales ne seront
pas terminés. Nous recommandons de recourir
aux services d’un installateur professionnel.
Assurez-vous de vous conformer à tous les
codes locaux du bâtiment.
Conservez ces instructions pour référence et
utilisation future. Une mauvaise installation
annule la garantie. Les armoires installées ne
peuvent pas être retournées.
Si vous éprouvez de la difculté avec votre
armoire, veuillez contacter soit votre marchand
ou contactez directement Robern.
Garantie limitée — d’une durée d’un an
Este manual de instrucción contiene información
sobre la instalación de la serie de gabinetes de
Robern. Esta serie viene en varios tamaños y
variaciones. Se puede proporcionar la opción
eléctrica con su(s) gabinete(s). Esta Serie
son gabinetes modulares y pueden montarse
individualmente o en conjunto.
La serie de gabinetes necesita una preparación
especial del lugar de la instalación. No instale los
gabinetes hasta haber completado la instalación
empotrada de las conexiones eléctricas, tuberías y
marcos, y de realizar el acabado de la supercie.
Recomendamos utilizar los servicios de un
instalador profesional. Cumpla todos los códigos
locales sobre construcción.
Guarde estas instrucciones para uso y referencia
futura. La instalación inadecuada invalida la garantía.
Los gabinetes instalados no podrán devolverse.
Si usted tiene algún problema con su gabinete,
póngase en contacto con su distribuidor o
directamente con Robern.
Garantía Limitada – Término de Un Año
24 1/2”,30 1/2”,36 1/2”
48 1/2”,60 1/2”
(622/ 775/ 927/ 1232
1537mm)
24 1/2”,30 1/2”,36 1/2”
48 1/2”,60 1/2”
(622/ 775/ 927/ 1232
1537mm)
Question and Answer IconNeed help?

Do you have a question about the Robern VANITY Series and is the answer not in the manual?

Robern VANITY Series Specifications

General IconGeneral
BrandRobern
ModelVANITY Series
CategoryIndoor Furnishing
LanguageEnglish

Summary

Installation Overview

Critical Site Preparation

Details essential site preparation steps before installing the vanity, covering rough-ins and wall finishing.

Model Number Configuration Guide

Decoding Vanity Model Numbers

Explains the alphanumeric structure of model numbers to identify specific vanity features and dimensions.

Rough-In Framing Instructions

Stud Spacing and Reinforcement Rules

Specifies maximum stud spacing and reinforcement requirements for metal studs for proper installation.

Slim Vanity Backer Board Install

Details 2x10 backer board installation for slim vanities, including height placement and alignment.

Deep Vanity Backer Board Install

Outlines 2x6 and 2x4 backer board installation for deep vanities, including placement and spacing.

Rough-In Plumbing Instructions

Plumbing Line Installation Guidelines

Provides guidance on installing water and drain lines, trap selection, and avoiding frame interference.

Electrical Option Rough-In

Electrical Wiring and GFCI Requirements

Specifies wiring instructions, including the need for a 120vac 20 amp GFCI circuit.

Outlet and Switch Placement Guide

Details recommended placement for electrical outlets and switches based on vanity type and configuration.

Vanity Frame Installation Steps

Installing Support Brackets

Details how to install support brackets (CB-210-1019) at a specific distance below the frame height.

Securing and Leveling the Vanity Frame

Leveling the Frame with Screws

Instructions for carefully leveling the frame using provided screws and adjustment screws.

Attaching Frame to Wall with Lag Bolts

Details using lag bolts to secure the frame to the wall, emphasizing all top holes.

Optional Ganging Kit Installation

Glass Front Installation Procedures

Limited Warranty and Claims

One Year Limited Warranty Terms

Outlines the terms of the one-year warranty, including repair, replacement, and exclusions.

Related product manuals