The Robert Sorby ProEdge Sharpening System
Thank you for purchasing the Robert Sorby ProEdge sharpening system, it has been
designed using hundreds of years of tool manufacturing experience.
The simple set-up and operation of the ProEdge makes sharpening tools a pleasure and
gives the woodworker great satisfaction in achieving a perfect sharp edge every time.
EC DECLARATION OF CONFORMITY
Business Name & Address Of Responsible Person:
- Robert Sorby, Athol Road, Sheeld, S8 OPA England.
Capacity /Role of Responsible Person:
- Manufacturer
Description of Machine:
- ProEdge Sharpening System
Serial Number:
- Axed to machine and box lid
Relevant EC Directives & Regulations Complied with for Above Machine:
- Supply of Machinery (Safety) Regulations 1992 - Amended 1994: Machinery Directive 98/37 /EEC
Relevant EC Transposed Harmonised Standards
- BS.EN 1050; BS.EN 292; (ISO14121); BS.EN 953;
National Standards Used:
- BS.EN 5304 - Safety of Machinery
DECLARATION:
I certify that on completion of manufacture of the machine detailed above that a full conformity
assessment has been completed and relevant essential health & safety requirements complied with:
Name: Ian Finkill
Status within Company: General Manager
Signature:
2
To Next Page
Loading...