Need help?Do you have a question about the Roberts 10-900 and is the answer not in the manual?
Ensure the cutting area is clear of fingers, tools, and debris before operating the sharp blade.
Keep hands and fingers clear of the handle's path during operation due to quick movement.
Maintain grip on the handle throughout its travel range due to spring return mechanism.
Only cut specified materials; do not attempt to cut metal, wood, or plastic laminate.
Designed for Solid Vinyl Tile, VCT, and Cork Tile up to 1/8" thick. Avoid other materials.
Adjust cutting blade height and angle using knob screws for optimal cutting performance.
Position tile against guide bar, scribe if needed, and lower handle to cut.
Use the front metal guide to cut the last tile against the wall accurately.
Avoid water exposure, wipe blades with oil, and oil actuators for optimal performance.
Hone the beveled edge of the blade on an oilstone, avoiding files or grinding wheels.
Order replacement top and bottom blades using specific part numbers for 10-918 and 10-900 models.
Clean dust, apply wax to the base for smooth operation and reduced tarnish.
To Next Page
General
