Roberts 10-60 - User Manual

9" Flooring Cutter
OWNER’S MANUAL
Cisaille pour revêtement de sol de 220 mm
MANUEL D’UTILISATION
Cortador para pisos de 220 mm
MANUAL DE OPERACIÓN
WARNING Read and understand all instructions. Failure to follow all instructions may result in serious
bodily injury. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
AVERTISSEMENT Lire et comprendre toutes les directives. Le non-respect des directives peut causer des
blessures graves.VEUILLEZ CONSERVER CES DIRECTIVES POUR RÉFÉRENCE ULTÉRIEURE.
ADVERTENCIA
Lea y comprenda todas las instrucciones. Si no se cumplen todas las instrucciones a puede
producir lesiones físicas graves. CONSERVE ESTAS INSTRUCCIONES PARA CONSULTARLAS EN EL FUTURO.
10-60

Summary

Safety Rules for the 9 Flooring Cutter

Set Up

Installation of the Cutter

Install the cross bar to the cutter base using the provided bolt.

Working Table

Install the working table as shown in the diagram.

Cutting

Cutting Preparation

Place angle attachment and adjust cutting angle from 90° to 45°.

Straight Cut (90° Angle)

Insert material, hold with bar, push handle down to make a cut.

Angle Cut (45° Angle)

Install 0-45° attachment and position the cutting angle to 45°.

Maintenance

Changing the Blade

Use Allen wrench to remove screws, hold blade, and move it out.

Carry

Hook the chain to the handle ring and carry the cutter as depicted.

Roberts 10-60 Specifications

General

Brand	Roberts
Model	10-60
Category	Cutter
Language	English