Roberts 10-95 - User Manual

25" Multi-Floor Cutter
OWNER’S MANUAL
Coupeuse à planchers multiples de 630 mm
MANUEL D’UTILISATION
Cortador para múltiples pisos de 630 mm
MANUAL DE OPERACIÓN
10-95
WARNING Read and understand all instructions. Failure to follow all instructions may result in serious
bodily injury. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
AVERTISSEMENT Lire et comprendre toutes les directives. Le non-respect des directives peut causer des
blessures graves.VEUILLEZ CONSERVER CES DIRECTIVES POUR RÉFÉRENCE ULTÉRIEURE.
ADVERTENCIA Lea y comprenda todas las instrucciones. Si no se cumplen todas las instrucciones a puede
producir lesiones físicas graves. CONSERVE ESTAS INSTRUCCIONES PARA CONSULTARLAS EN EL FUTURO.

Summary

Multi-Floor Cutter Safety Rules

California Proposition 65 Warning

Warning regarding chemicals in dust from construction, potentially causing cancer or reproductive harm.

Cutter Setup

Assembly Instructions

Details on installing the wheel assembly and attaching the handle to the cutter.

Cutting Procedures

Angle Attachment Setup

How to adjust and use the angle attachment for precise cuts.

Straight Cut Operation

Step-by-step guide for making straight cuts using the built-in guide bar.

45-Degree Cut Operation

Instructions for making angled cuts at 45 degrees using the angle attachment.

Cutter Maintenance

Blade Replacement

Detailed steps for safely removing and replacing the cutting blade.

Nylon Bar Replacement

Instructions for replacing the nylon cutting bar.

Safe Transport

Guidance on how to secure and carry the cutter for transport.

Exploded Parts Diagram

Parts List

Cutting Capacity Chart

Cutting Capacity Chart (Continued)

Notes Section

Roberts 10-95 Specifications

General

Brand	Roberts
Model	10-95
Category	Cutter
Language	English