Roberts Blutune - Recalling a preset station

Recalling a preset station
1. Press and release the On/Standby button to switch on the radio.
2. Repeatedly, press and hold the Source button to select either the FM
or DAB mode.
3. Press and hold the Select button. The display will show, for example,
'PO1 (Empty)' if no station has been stored to that preset. If a preset
has been stored, then the display will show either the station name
(for DAB stations) or the frequency (for FM stations).
4. Press and release the Tuning Up or Down buttons to select the
desired preset station.
5. Press and release the Select button. Your radio will tune to the chosen
preset station stored in the preset memory.
21
2
4
1
3,5
4
Preset
<P01 BBC Radio
>
BBC Radio 4
The latest news