17
2. Select a new track using the F. Skip or B. Skip buttons. The track
number will show on the display.
3. To store the track press and release the Programme/Memory button.
The display will show the selected track number ('16'). The new track
has been stored in the programme.
4. Press the Play/Pause button to play the revised programme tracks.
Checking a programme
1. Whilst the CD is in Stop mode, repeatedly press and release the
Programme/Memory button to step through the tracks programmed.
The display will show each programmed track number in sequence.
2. Resume play by pressing the Play/Pause button.
Erasing a programme
1. Whilst the CD is in Stop mode, open the CD door to erase the
programme. Programmes are also erased by changing position of
the Function switch to 'Off' or to the 'Radio' position.
• Alternatively, whilst programming press the Stop button as needed.
To Next Page
Loading...
