Need help?Do you have a question about the Robertshaw 9700i and is the answer not in the manual?
General| Type | Programmable Thermostat |
|---|---|
| Connectivity | Wi-Fi |
| Mobile App | Yes |
| Hold Feature | Yes |
| Backlight | Yes |
| Battery Indicator | Yes |
| Compatibility | Works with most HVAC systems |
| Power Source | Battery |
| Programmability | 7-day |
| Temperature Range | 45°F to 90°F |
Lists the specific Robertshaw models covered by this manual.
Introduces the thermostat's menu-driven interface and features.
Crucial precautions for safe installation, operation, and maintenance.
Details on compressor protection and temperature limitations.
Step-by-step guide to adjust the thermostat's internal clock and day.
Instructions for choosing between HEAT, COOL, or AUTO CHANGEOVER modes.
How to operate the fan independently or with heating/cooling.
Explanation and setup of the intermittent fan function.
How to temporarily override the programmed temperature for a short period.
Guide to setting a temporary temperature hold for more than 3 hours.
How to set a constant temperature indefinitely.
Steps to resume scheduled programming after a hold.
How to program a specific temperature for periods away from home.
Options for setting schedules for different days (e.g., Mon-Sun, Mon-Fri).
How to set up specific time periods and temperature settings for each day.
Fine-tuning the start times for each programmed event.
Configuring desired heating and cooling temperatures for each event.
Instructions for copying one day's schedule to other days.
Defines a programming event as a specific time period with a temperature setting.
Guidance on selecting thermostat programs based on personal schedules.
Steps to enter the user settings section for customization.
Lists the available options for personalizing thermostat display and behavior.
How to set temperature display to Fahrenheit or Celsius.
Settings for clock format (12/24 hr) and showing setpoint temperatures.
Option to choose between 2, 4, or 6 programmable events per day.
Configuration of temperature differentials and remote sensor usage.
How to restrict maximum/minimum temperature settings.
Setting display language and security levels to prevent tampering.
How to set and manage a security code for settings protection.
Guidance on when to change specific user settings like filter intervals or differentials.
Configuration of core system parameters during installation.
Selecting the energy source for the primary heating stage.
Settings for auxiliary heat sources and fan run-on time after cooling.
Configuration for outdoor sensors, balance points, and automatic mode switching.
Setup for EER feature and deadband setpoints for system control.
Setting a security code to protect installer-specific configurations.
Storing contractor details and setting system/filter monitor reminders.
Setting up maintenance reminders based on system runtime or calendar.
Warning against unauthorized changes to installer settings due to potential damage or costs.
Detailed explanation of the EER energy-saving feature.
How indoor/outdoor sensors work, and where to install them for optimal performance.
Handling power loss and resetting the thermostat to factory defaults.
How to check if heating or cooling cycles are active.
Where to find help and contact support for the thermostat.
Tips and recommendations for lowering heating and cooling costs.
Recommended temperature settings for optimal energy efficiency.
How the thermostat indicates a low battery status.
Step-by-step guide for replacing the batteries in the thermostat.
Details of the manufacturer's limited warranty for the thermostat.
Information on what is not covered and how to return for service.
To Next Page
