Do you have a question about the Robertshaw RS3110 and is the answer not in the manual?
Type | Non-Programmable |
---|---|
Temperature Range | 45°F to 90°F (7°C to 32°C) |
Schedule | Non-Programmable |
Stages | 1 Heat / 1 Cool |
Backlight | No |
Hold Function | Yes |
Battery Life | Up to 1 Year |
Compatibility | Single Stage Heating and Cooling Systems |
Display | Digital |
Power Source | Battery (2 x AA) |
Weight | 0.3 lbs |
Set weekly programs with four time/temp settings for weekdays and weekends.
Supports multi-stage gas/electric furnaces and heat pumps for reduced inventory.
Enhances visibility for easier viewing and setting of temperature.
Maintains optimal customer comfort by adjusting temperature sensitivity.
Maintains set point and programmed parameters even during power outages.
Provides notice when air filters need changing.
Turns on heat automatically when temp goes below 37°F to protect pipes.
Safeguards HVAC equipment with this system safeguard.
Allows for manual temperature adjustment.
Uses sturdy wire clamps for fast and easy installation.
Lists and explains the terminal designations specific to the RS3110 model.
Lists and explains the terminal designations specific to the RS3210 model.
Covers weight, electrical rating, temperature control range, and accuracy.
Details power sources and compatible system types for each model.
Identifies models from other manufacturers that can be replaced by the RS3110.
Identifies models from other manufacturers that can be replaced by the RS3210.