Robertshaw RS6220 - User Manual

Thank you for purchasing a Robertshaw RS6000 programmable
thermostat. This user’s manual will guide you through the setup of the
RS6110 single stage and the RS6220 two stage thermostats. The
thermostat should already be mounted and correctly wired. The default
settings will enable the thermostat to operate efficiently. Before making
any changes to the schedule read the section on Default Settings.
Features
• Pop-Up Wizard
• Automatic changeover
• Circulating Fan
• Worry-Free memory retention
• Easy change battery
• Large back lit display
• Filter change reminder
• Low battery indicator
• Fahrenheit and Celsius displays
• EnergyStar™ compliant
• Dual power
• Adjustable 1
st
stage temperature differential: 0.5 F Degrees to 3.0 F
Degrees (0.5 C Degrees to 1.5 C Degrees)
• Accuracy within ±1 F Degree
• Universal staging on multi-stage units
• Automatic heating shutdown if temperature exceeds 99°F (37°C)
• Keypad security lockout
• 4 events per day for heating and cooling
• Individual day scheduling
• User settable Hi and Lo temperature limits
1
RS
6
110
RS
6
220
352-00057-001
USERS MANUAL

Summary

Features

Application

Important Safety Information

Providing Power to the Thermostat

Installing or Changing the Batteries

Display Map

Set Time and Day

Default Settings

User Programmable Settings (Default)

Emergency Heat

Auto Changeover

Making Changes To the Programmed Settings

To Make Changes in the Schedule

To Make Changes to the Settings

Security Lockout to Protect the Settings

Two Stage Systems

Energy Efficient Recovery

Backlit Display

Overriding the Schedule

Permanent Override

Describes how to set a constant temperature, bypassing the schedule.

Schedule Overrides

Temporary Override

Explains how to set a temporary temperature change for a specific duration.

Origin of Setpoint

Automatic Shut-Down

Setting the Fan To ON, AUTO or CIRC

Troubleshooting

Five Year Limited Warranty

NOTES

Robertshaw RS6220 Specifications