Need help?Do you have a question about the Robin 109 and is the answer not in the manual?
General| Brand | Robin |
|---|---|
| Model | 109 |
| Category | Water Pump |
| Language | English |
Precautions related to exhaust gases, including ventilation and proximity to people.
Precautions for refueling, emphasizing flammability and safe practices.
Precautions to prevent fires, including keeping distance from flammable materials.
General safety warnings for hot parts and unsuitable uses of the pump.
Essential checks before starting the pump to ensure safe operation and prevent damage.
Identifies and lists components of the PTG109 centrifugal pump model.
Lists components for PTG155, 208, 208H, 209, 307, 405 centrifugal and PTG208ST, 307ST semi-trash pumps.
Identifies and lists components for PTG208T, 305T, 405T trash pump models.
Lists components for PTG208D, 307D diaphragm pump models.
Procedure for attaching flanges and checking valves on specific pump models.
Instructions for connecting the suction hose, including precautions against collapse.
Guidance on connecting the delivery hose, emphasizing hose bands for secure connection.
Steps for checking and refilling engine oil, including oil type and viscosity recommendations.
Instructions for checking fuel levels, type, and tank capacity, with warnings about refueling.
Importance of priming the pump casing with water before operation to prevent overheating.
Detailed steps for starting the engine, including fuel cock, stop switch, and choke operation.
Procedure for operating the pump at different speed settings and warming up the engine.
Instructions for safely stopping the engine, including cooling down and closing the fuel cock.
Procedure for draining water from the pump for storage.
Steps to disconnect the delivery hose and drain water for storage on specific models.
Instructions for draining fuel from the tank and carburetor for storage.
Procedure for changing engine oil before storing the pump.
Final cleaning and storage instructions for the pump.
Troubleshooting steps for when the pump fails to start or run.
Diagnosis and solutions for reduced pumping volume or flow rate.
Steps to resolve issues where the pump fails to prime itself.
Troubleshooting for the delivery hose not staying securely on the coupling.
Steps to identify why the pump might suddenly stop during operation.
Procedures for diagnosing why the engine will not start.
To Next Page
