Robin DY27-2B - Maintenance Procedures; Engine Oil and Filter Service

Step lPart to remove
’ 4
Air cleaner
Procedures
(1) Remove cleaner cover from the
(2) Loosen the wing bolt to remove
(3) Remove cleaner body from intake
6 4 X 12 mm flange bolt...-..2pcs .
cleaner body.
element.
manifold.
Remarks
Be careful not to lose
the washer and the
packing
for wing
bolt.
Tool
10 mm
box wrench
12 mm
box wrench
8 0 BOLT and WASHER
PACKING
CLEANER BODY
ELEMENT
I Step I Part to remove I Procedures
I
Remarks
5 (1) Remove recoil starter from Recoil starter
blower housing.
6 4 x 10 mm flange bolt**..**4pcs.
HOUSING
3 spanner
6 0 FLANGE BOLT : 4pcs.
m
RECOIL STARTER
FIG. 24
- 16 -