Need help?Do you have a question about the Robin EY35 and is the answer not in the manual?
Defines the maximum output an engine can deliver after its initial break-in period.
Specifies the engine's power output for continuous operation at optimum speed.
Provides a detailed sectional diagram of the engine with labeled components.
Provides essential advice and preparatory steps before disassembling the engine.
Offers step-by-step instructions for safely disassembling the engine.
Provides detailed procedures for correctly reassembling engine components.
Describes the procedure for adjusting tappet clearance on intake and exhaust valves.
Details the operational principles and construction of the carburetor.
Provides procedures for disassembling and reassembling the carburetor.
Covers float system components, jet cleaning, and pilot screw adjustment.
Identifies common causes and solutions for engine starting issues.
Addresses starting problems specifically related to the fuel system.
Covers starting issues arising from lack of proper engine compression.
Lists electrical system faults that can prevent the engine from starting.
Details common causes and corrective actions for engine misfires.
Identifies various reasons why the engine might unexpectedly stop running.
Explains the causes of engine overheating and how to address them.
Lists potential causes for engine knocking sounds, such as fuel quality or timing.
Covers causes and solutions for engine backfiring via the carburetor.
Guides on installing electrical components like the ignition coil and capacitor.
Provides the procedure for accurately adjusting the engine's ignition timing.
Explains how to verify the correctness of the ignition timing using a tester.
To Next Page
General
