Robin EC05-2 - 10. RUN IN OPERATION of REASSEMBLED ENGINE

10. RUN IN OPERATION of REASSEMBLED ENGINE
An overhauled engine must be carefully run-in to get proper surface condition on newly installed parts.
Especially when cylinder, piston or
piston rings are replaced, a thorough run-in operation is indispensable.
The recommended run-in schedule is as follows:
LOAD
SPEED TIME
EC05-2
EC25-2
EC17 EClO EC07-2
No load
10 rnin. 2,000 rprn
I
No load I 3,000 rprn I 10 rnin.
I
~
No load
60 rnin.
4,500 rprn
9.5 HP 5.5 HP 3.5 HP
2.3 HP
1.8 HP
30 min.
4,000 rprn 8.0 HP 5.0 HP 3.0 HP
2.0 HP
1.5 HP
10 rnin.
4.000 rprn
- 42 -