Need help?Do you have a question about the Robinair RG3 and is the answer not in the manual?
Covers warnings about pressurized tanks, hoses, vapor, fire risks, compressed air, and mixed refrigerants.
Warns about the risk of electrical shock from high voltage inside the unit.
Defines 'WARNING' and 'CAUTION' signal words and their implications.
Lists approved refrigerant categories and specific types for the unit.
Explains the function of filters and filter/driers to prevent contamination.
Advises on safe valve operation and storage cylinder handling.
Covers hose requirements and the unit's internal shut-off switch.
Mentions Push/Pull method and tips for maximizing recovery rates.
Details the step-by-step setup for the refrigerant recovery unit.
Offers advice on voltage, extension cords, and outlet usage for optimal performance.
Outlines the specific steps for performing a refrigerant recovery.
Explains the push-pull method for bulk liquid recovery from large systems.
Provides step-by-step instructions for the liquid recovery process.
Details the step-by-step process for vapor recovery.
Explains how to purge non-condensable gas from a storage cylinder.
Details cylinder types, working pressures, and capacity limits (80%).
Covers refrigerant designation, storage advice, and leakage prevention.
Addresses problems with unit power, compressor buzzing, and high-pressure shut-off.
Covers troubleshooting for slow recovery and blown fuses.
Lists numbered parts and describes available rebuild kits for the unit.
Details filter installation and procedures for burned-out systems.
Explains how to prepare the unit for long-term storage.
Outlines warranty terms, restrictions, and instructions for obtaining service.
General| Brand | Robinair |
|---|---|
| Model | RG3 |
| Category | Test Equipment |
| Language | English |
To Next Page