11
Operation Instructions
• Instructions of the 【Time】function
When the warm or cool or refresh program is selected, the
【
Time
】
button can be
used to adjust the
drying time in 10 min. steps.
• Instructions of the 【Intensity】function
Used to adjust the dryness level of the laundry. The level has four grades .
The drying time
increases 3 minutes in every grade.
1.
The intensity function can be activated only before the programme start.
2.
Press the 【Intensity】button repeatedly to select the drying time.
3.
Except the 【Cotton Iron】【Quick】【Synthetic Iron】【Baby Care】【Warm】
【Cool】【Refresh】, all the other programs can be the【Intensity】function.
• Instructions of the 【Speed dry】
Use to curtail shorten the drying time, the 【Cotton Extra】【Cotton Standard】【Mix】
【Jean】program can be set the function.
• Instructions of the【Signal】function
Set up the buzzer on or off. In the general condition, the buzzer is on. Please press it if needed. When the
buzzer on:
1.
The dryer will give the leading sound if press the extra function buttons.
2.
If the dryer is running, rotate the function choosing knob, the dryer will remind the
operator it is an
invalid choose.
3.
When the drying programme is end, the buzzer will also remind the user
• Instructions of the【Anti-Crease】function
At the end of the drying cycle,the anti-crease operation time is 30 minutes (default ) or 120
minutes (selected).
The
【
Anti-Crease
】
light shall illuminate when the anti-crease function is selected. This
function prevents the
laundry from creases. The laundry can be removed during the
anti-crease phase. Except
【
Cool
】
,
【
Refresh
】
and
【
Baby Care
】
, all the other programs
have this function.
To Next Page
Loading...
