ROBLON FL 150-3 B - 1.0 Introduction

FL150-3 User Manual
Page 02
1 . 0 I n t r o d u c t i o n
The ber optic lighting system consists of a light generator as the electrical device and the ber harnesses
as the light. The functionality depends on how it is operated and on the maintenance of the components.
This guide should serve you as a guideline and the forms and lists should be a helpful tool to assure a well
operated and maintained system. The compliance with the maintenance formalities is the main contribution
to
· guarantee functionality
· an expanded life span of the components
· save avoidable replacement costs
· have a satisfying, uninterrupted system illumination
Your Roblon Fiber Optics metal halide light generator, type FL 150 - 3, is intended for indoor use in ber
optic lighting systems using either glass or PMMA bers.
The metal halide light generator has been developed to meet the requirements of a ber optic lighting
system, where the light output intensity and efciency must be optimized in order to ensure the best
performance. Furthermore, this generator is prepared for use in cabinets or showcases, either semi-closed
or closed compartments.
This document describes the following product: Item number 0161 0000 FL 150-3B. White light.
1 . 1 C o n t e n t s
1.0 Introduction page 02
1.1 Contents page 02
1.2 Product overview page 03
1.3 Technical data page 03
2.0 Installation instructions page 04
2.1 General mounting of FL 150-3 page 04
2.2 Mounting in closed compartments page 05
3.0 Fiber types page 06
4.0 Switching on page 06
5.0 Care, maintenance and replacement page 07
5.1 Maintenance tasks and explanations page 07
5.2 Replacement tasks and explanations page 09
6.0 Troubleshooting page 10
7.0 Spare parts and accessories page 11