Robomow RS622 Operating & Safety Manual

23
Robomow Operation
4.3.2.2 Interval
 The Interval option controls the time between mowing cycles.
Shorter intervals between cycles create shorter growth
periods. Longer intervals allow for longer grass growth periods.
 Grass growth rate changes during the year (depending on
temperature, grass type, fertilizing and etc.).
 The default Interval is Twice a week.
 During off-season when growth rate of the grass is slower, it
is recommended to change the Interval to Once a Week or
Every Two Weeks. This resting period helps the grass and
prolongs the lifetime of the mower.
 High fertilization and favorable weather conditions may cause
the grass to grows faster. In such cases, use the Interval
option to decrease the time between cycles.
 The minimum Interval is Every 2 Days. it is available only for
lawn areas smaller than 2000 m
2
(6600 ft.).
 To change the interval follow these steps:
4.3.3 Zones – To Add / Remove / Edit Zone(s)
Use the Zones option to add, remove or edit preset zones.
Note: Sub-Zones are marked by numbers (1, 2, 3, and 4).
Separated Zones are marked by letters (A, and B).
( Section 4.3.3)
(
Section 4.3.3.1)
(
Section 4.3.3.2)
(
Section 4.3.3.3)
Scroll to select Operations from the Lawn
Options menu. Press
.
Scroll to select Interval. Press
.
Scroll to select All Zones / By Zone. If By Zone
is selected scroll to select Zone. Press
Scroll to change mowing Interval.
The default interval is Twice a week.
Scroll
to select Zones from the Lawn Options
menu. Press .
Scroll to select Add / Remove / Edit. Press
.

Robomow RS622 Specifications

General

Brand	Robomow
Model	RS622
Category	Vacuum Cleaner
Language	English