Robomow RS622 Operating & Safety Manual

31
Using the Power Box
Chapter 5 Using the Power Box
5.1 Power Box Alerts
Alert Event
Docking Indicator is lit. Mower is in its Base Station.
Operating Indicator is lit. Mower is not in its Base Station.
On/Off Buttin Indicator is lit. Mowing schedule is Off.
Wire Indicator - Flashes and
Beeps
The Perimeter Wire is cut,
disconnected, or too long. .
All Indicators Flash.
Mower did not return to the Base
Station after 4 hours of departure.
When the mower is detected at the
Base Station, alerts will turn Off.
To turn alerts Off, Press the On/Off
Button.
All Indicators Flash and Buzzer
sounds for 10 seconds.
Anti-Theft option is set On, and the
mower was removed from Base
Station when it was not scheduled to
operate.
To turn alerts Off, Press the On/Off
Button.
5.2 To Turn Buzzer On/Off
 Press and hold the On/Off Button for 10 seconds.
o A short beep indicates On.
o A flash indicates Off.
5.3 To Disable the Automatic Operation
This option is used to Disable the Automatic Operation of Robomow according
to its predetermined settings.
Disabling the Automatic Operation does not prevent Manual Operation from
the mower itself.
 Press and hold the On/Off Button for 2 seconds.
The “Mowing Schedule is Off” icon will be displayed:
 If Robomow is currently in the process of mowing:
o Robomow will complete the current mowing cycle.
o After returning to the Base Station, Robomow will not go out for
its next scheduled operation.
 To Enable the Automatic Operation
 Press and hold the On/Off Button for 2 seconds.
Docking Indicator
Operating Indicator Wire Indicator
On/Off Button

Robomow RS622 Specifications

General

Brand	Robomow
Model	RS622
Category	Vacuum Cleaner
Language	English