27
Robomow Operation
4.3.5 Near Wire Follow
In the Main Zone, when Robomow completes its operation, or when the Home button instructs it to Go To Base, it drives
itself to the Base Station.
Robomow drives along the Perimeter Wire with a dynamic offset (not centered) to prevent wheel tracks along the same
path. This return behavior can be turned off.
The offset Distance values range from 1 to 12. They represent
different distances from the wire.
The higher the Distance setting, the smaller the probability of tracks
along the perimeter.
4.4 Mower Options
You may change several of Robomow’s default settings.
Use the Mower Options menu to select these options.
4.4.1 Child Lock
The Child Lock feature prevents accidental pressing
of keys (buttons), especially by children.
This feature is turned Off by default.
To turn this feature On, set Child Lock to On.
When Child Lock is turned On, Keys Locked is
displayed.
To temporarily release Keys Locked:
Press then .
The keys will relocked after 30 min. without user
intervention.
Press to select Near Wire Follow from the
Lawn Options menu.
Press
to select On/Off.
Scroll to select All Zones / By Zone. If By Zone
is selected scroll to select Zone. Press
.
Scroll to select On/Off.
Off = Robomow will drive centered along the wire.
Scroll to set the maximum value for the Distance
Robomow drive from the edge. Press .
Scroll to select Distance Press
To Next Page
Loading...
Need help?
General
